BYHKM - ZL-22C ZYGLO PENETRANT
- MSDS: BYHKM
- Manufacturer: MAGNAFLUX CORP A DIV ILLINOIS TOOL WORKS
- Product Name: ZL-22C ZYGLO PENETRANT
- National Stock Number: 6850-01-241-0650
Product Identification
Product ID:ZL-22C ZYGLO PENETRANT
MSDS Date:05/27/1993
FSC:6850
NIIN:01-241-0650
MSDS Number: BYHKM
Responsible Party
CHICAGO, IL 60656-3504
US
Emergency Phone: 708-867-8000, CHEMTREC 800-424-9300
Info Phone: 708-867-8000
Cage: 37676
Contractor
Telephone: 847-657-5300/
Cage: 37676
Ingredients
MINERAL OIL, WHITE
CAS: 8042-47-5
RTECS: PY8047000
Fraction By Weight: 25%
ALIPHATIC PETROLEUM SOLVENT
CAS: 8008-20-6
RTECS: OA5500000
Fraction By Weight: 15-40%
DISTILLATES, RESIDUE, LOW BOILING
CAS: 68477-31-6
RTECS: JN9500000
Fraction By Weight: 15%
NAPHTHALENE
CAS: 91-20-3
RTECS: QJ0525000
Fraction By Weight: 2%
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
ISOBUTANE
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: 30%
Hazards
LD50 LC50 Mixture:TLV: UNKNOWN, NOT ESTABLISHED.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN-IRRITATION. EYE-MILDLY
IRRITATING. INGESTION-GASTRIC UPSET.
Explanation of Carcinogenicity:CONTAINS NO KNOWN OR SUSPECT CARCINOGENS
LISTED WITH OSHA, IARC OR NTP.
Effects of Overexposure:INHALATION-DIZZINESS. NAUSEA.
Medical Cond Aggravated by Exposure:NONE
First Aid
First Aid:INHALATION-REMOVE TO FRESH AIR. SKIN-WASH OFF HANDS PROMPTLY.
USE SOOTHING LOTION. EYE-RINSE EYES COPIOUSLY WITH WATER.
INGESTION-CALL PHYSICIAN IF SEVERE.
Fire Fighting
Flash Point Method:PMCC
Flash Point:=-17.8C, 0.F
Extinguishing Media:CARBON DIOXIDE, FOAM.
Fire Fighting Procedures:KEEP CONTAINERS COOL WITH WATER SPRAY. DO NOT
SPRAY WATER ON BURNING ZL-22C.
Unusual Fire/Explosion Hazard:AEROSOL CANS MAY BURST ABOVE 130F AND
SPRAY OUT FLAMMABLE LIQUID.
Accidental Release
Spill Release Procedures:EMPTY OUT AEROSOL CANS BEFORE DISPOSAL.
PRESSURIZED AEROSOL CAN ARE NOT ACCEPTABLE WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE AWAY FROM HEAT SOURCES. FOR
AEROSOLS, KEEP BELOW 130F.
Other Precautions:AVOID BREATHING VAPOR OR SPRAY MIST. AVOID FREQUENT
OR PROLONGED SKIN EXPOSURE. DO NOT GET IN EYES.
Exposure Controls
Respiratory Protection:RESPIRATORS WITH CHEMICAL CARTRIDGE IF USING IN
POORLY VENTILATED AREA.
Ventilation:USE IN SPRAY BOOTH WHERE VENTILATION IS ADEQAUTE TO CARRY
VAPORS AND OVERSPRAY FROM OCCUPIED AREA.
Protective Gloves:NITRILE RUBBER GLOVES.
Eye Protection:FULL GOGGLES WHEN SPRAYING.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
COMPRESSED GAS, N.O.S.
Chemical Properties
HCC:V3
Boiling Pt:=210.C, 410.F
Vapor Pres:0.5MM
Vapor Density:>1.0
Spec Gravity:0.96
pH:7
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREEN LIQUID.
Percent Volatiles by Volume:5%
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:ON COMBUSTION, SMOKE, SOOT, OXIDES OF
CARBON AND NITROGEN.
Disposal
Waste Disposal Methods:INCINERATE OR SEND TO WASTE DISPOSER WHO CAN
INCINERATE IT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.